PVC Interboard Ribbon Cables

"the product that Patrick Kiely started the company with back in 1983 and today is still going strong"

Whatever your connection requirements, St. Cross Electronics has a simple answer.

We make PVC Interboard ribbon cables (jumpers) in many combinations for a wide range of applications, hundreds of standard designs as well as custom products.

St. Cross Electronics jumpers are made from UL2651 approved PVC cable and can be supplied in lengths of 35mm to 30M in increments of 1mm and from 2 to 22 conductors, allowing you to choose the exact jumper to solve your interconnect problem most effectively.

Our jumpers are supplied with strip lengths of 3 to 20mm in increments of 0.5mm & are part stripped to protect conductors during storage, except L2607 series that we tin after cutting.

Perhaps you need a jumper from a PCB assembly to a special connector or a switch - no problem; we can notch one end to separate the wires. Contact us for the complete cable assembly.

L2607B & L2407B Series

Stranded pre-bonded to be a flexible cable. The seven strands are twisted cable pairs & bonded together for ease of insertion into PCB. Upon flexing the bonding breaks down & then acts like seven individual strands.

Specification

U.L. Style Number: 2651
Insulation material: Grey PVC
Temperature rating: -20 to 105'C
Voltage rating: 300V
Flamability rating: VW-1
Conductors: 7/0.15 (26AWG) or 7/0.2 (24AWG)

Pitches available:

2.54mm (0.1") in 26 & 24 AWG; +/-0.12 non-accumulative
Other pitches available upon request.

L2607 Series

Stranded maximum flexibility. Seven individually tinned strands that are then over tinned on the stripped ends. Optional rainbow colour coding available on 24AWG.

Specification